Carbon Fiber Little Boy RDA Clone in 6 colors – $17.99
The Little Boy clone is constructed with copper and 316 stainless steel. The airflow is constrolled by the copper sleeve that can can be rotated around the base. In terms of builds, this RDA has a traditional three post setup for single or dual coil builds and 2 mm post holes to help make building easier. Each Little Boy comes with an extra wide “monster” drip tip for more vapor in every hit. It also comes with a 510 adapter and a 510 drip tip for a more traditional intake.
Little Boy – Carbon Fiber Series (clone)
- 316 stainless steel and copper
- Copper sleeve with carbon fiber design on the exterior
- Delrin extra wide bore drip tip
- Three airflow holes
- 2mm post holes
- Adjustable airflow
- Three posts
- Copper center post
- 22mm diameter
- 510 threading
- Mini flathead screwdriver
- 510 adapter
- 510 drip tip
- Wooden gift box
This would be great for the iSticks and smaller mods!!
The Mini Micro by Doc Dave CLONE. It is a genesis type rebuild-able atomizer, but is smaller in comparison to the Bliss and Steam Turbine. Made of stainless steel, it looks flush and sits beautifully on any 14500 mod. The Mini Micro has dual stacked air holes, meaning there are stacked air holes on either side of the atty.
With the Mini Micro you can building your wick as a single, dual, U wick,single coil or dual coil. This allows for plenty of options and different approaches to perfecting your build. Perfecting your build will allow your atty to perform in the exact way you desire. The tanks are made of Pyrex glass.
The Mini Micro can store about .8 ml of liquid. Although small, don’t let the size of this atty determine your expectation of its performance. It is both extremely appealing and can provide you with exactly what you want from an RBA!
- 16mm RBA
- Stainless Steel
- Genesis Type RBA
- Single, Dual, U Wick, Single or Dual Coil Settings
- Pyrex Glass Tank
- Holds up to .8 ml of liquid
Plume Veil v1.5 RDA Clone SS RDA Replica
MARQUIS RDA CLONE $ 33.00 Preorder
The rather simple looking Marquis RDA is a fantastic rebuildable for all the flavor chasers out there! If you love the Veritas as much as I do, then you just might like this Marquis RDA even more as it has a very similar design, but what I love is that this has a dedicated air hole for each coil.
What sets the Marquis RDA miles ahead of others like it is not just the design, but also the build tools that come with it making it super easy to whip up perfect coils every time. This thing is super easy to build on, looks great with no overbearing logos, and produces some of the best flavor you’ll get in an RDA to date!
PREORDER – Ships in 2 weeks
- 1x Marquis RDA with top cap
- 1x PEEK drip tip adapter
- 1x 10mm wide bore drip tip ( 8.75mm Bore)
- 1x 4mm 510 drip tip adapter
- 1x Flush 510 drip tip adapter
- 2x 2.5 + 3mm coil building rods
- 2x 3.5 + 4mm coil building rods
- 1x Extra top cap/removal lid o ring
- 304 stainless steel construction
- 510 threading
- 22mm outside diameter.
- 26mm overall height w/o drip tip
- Dual ground screws easy dual coil setup
- Dual coil/single coil capable
- Solid copper positive connection
- Innovative crown style center post with wire capture tabs
- High temp PEEK insulators
- Vertical, horizontal or chimney coils
- Cotton, silica, SS mesh, etc. wicking
- Custom coiling rods in 2.5mm, 3.0mm, 3.5mm, 4.0mm diameters
- Blind holes in liquid well for perfect coil allignment
- 6mm deep liquid well
- Leak resistant design
- Seamless flush fit fop cap
- Double o rings for a firm top cap seal
- Adjustable airflow ( single and dual coil mode)
- Internal o ring relief for easy air flow adjustment
- Reduced atomizer chamber
- Removable lid (14mm) with PEEK heat insulator
- Custom wide bore drip tip (8.7mm Bore)
- 2x custom lid adapters for 510 style drip tips
- Custom CNC engraved and serialized (Logo inside on the deck, no etching or engraving on top cap)
DIRECT LINK: http://www.gvapers.com/products/marquis-rda-clone
Get 10% off this weekend only! Now thru Sunday, January 11th, enjoy 10% off pretty much their *Entire Online Superstore (Clearance & High End Box MODs excluded) with the Coupon Code WEEKEND10.
Making these Kayfun V4’s $38.69 each
The Kayfun v4 has been completely redesigned! It has incorporated many of the features customers have asked for including a glass tank option, easy top filling, liquid control, and access to the deck without draining the tank. The air flow on the Kayfun v4 has also been improved greatly and is very smooth and consistent with very little noise.
The removable build deck now includes four (4) coil screws for dual coil builds or you can build single coil. EHPro has decided to choose the highest medical grade Stainless Steel to build the kayfun unlike any others. This high grade stainless steel adds to the beauty of the surface finish and gell in the hand but its also the most durable and sensible material choice.
EHPRo Kayfun v4 RBA Clone Features
- High quality clone
- 304 Grade Stainless Steel
- Four (4) post screws for Dual or Single coil builds
- Three tank choices (glass, polycarbonate / plastic, stainless steel included)
- Liquid flow control (manually adjust amount of fluid desired to saturate wick, or, allows user to be able to completely shut off fluid transfer from tank to deck to prevent leaks when not in use)
- Easier access to coil (no need to drain tank between coil changes)
- Easy fill through top cap
- Adjustable 510 connector
- Adjustable airflow control
- Exchangeable tanks (borosilicate glass, polycarbonate, steel all included in the base kit)
- 22mm Diameter with polycarbonate / plastic tank
- 23mm Diameter with glass and stainless steel tank