The Kayfun Lite Plus V2 Clone is one of the best and most up to date Kayfun clones to date, with the new styled drip tip like what the V2 from SvoëMesto, the air-flow adjustment on the bottom, the added o-ring to the juice fill screw, and the fill valve has also been recessed further into the bottom cap to hopefully help prevent juice from being wasted from spillage.
The Kayfun Lite Plus V2 is a rebuildable atomizer that is one of the easiest and most simple devices to rebuild, with practice and the right tools a person can learn to build coils within a small amount of time. Any time you are rebuilding you need to follow safe rebuilding, by making sure you are building the coils that will work with your batteries, using a meter or atomizer ohm meter to check your coils, and making sure your devices are in good operating condition.
I’m a Kayfun Junkie, I’ve had some good ones and some bad ones but rest assured that the EHpro versions are the BEST reproductions on the market and at that price it’s hard to beat.
1. Stainless steel construction throughout
2. Standard 510 atomizer connection
3. Can be configured with clear center window, complete clear tank or complete stainless steel
4. Juice capacity 4.5ml (Can be extended with separate parts)
5. Standard 510 drip tip connection
Included with the Kayfun atomizer:
1 x Kayfun Lite Re-buildable Atomizer w/ Drip Tip
1 x Small Translucent Polypropylene Window
1x Large Translucent Polypropylene Window
1 x Flat/Philips Head Screwdriver Keychain
1 x Drip Tip Adapter
Replacement Positive and Ground Screws
Approx. 5-inches of 2.5mm Braided Silica, Hollow
Approx. 6-inches of 32-gauge Kanthal Wire
Sold by AKA Vapers
BEST iClear from Innokin THE BEST ATOMIZER YET!!!!! FULL OF TASTE
Genuine Innokin X.1 with Serial number scratch off to verify Authenticity.
These come with the NON rotating drip tip. Innokin listened to their customers who complained about the rotatable mouth piece and lack of options. The design of the Innokin iClear X.I Pyrex Glass Dual Coil Clearomizer allows for use of either the rotatable mouthpiece, the new non rotatable one, or any standard 510 drip tip. This is a huge improvement allowing users to stick to their choice of tip.
The Innokin iClear X.I Pyrex Glass Dual Coil Clearomizer. The new iClear X.I clearomizer features a Pyrex Glass tank, non-rotatable drip tip, and a bottom coil design with 2.1 Ohms of atomizer resistance.
The iClear X.I Features a replaceable bottom feeding dual coil head allowing you to keep your wick constantly saturated and takes away the need to twist and turn your device prior to every vape.
Features of Innokin iClear X.I Pyrex Glass Dual Coil Clearomizer
3ML Pyrex Glass Tank
Non-Rotatable Drip Tip
Dual coil design
Resistance: 2.1 Ohms
4 short bottom feeding wicks
2 replacement coils 2.1 Ohms
EXCLUSIVE ONYX BLACK COLOR KAYFUN LITE+. This is the same high quality Kayfun Lite Plus clone, now with an electroplated matte black finish. Very unique look!
All NEW version! The Kayfun Lite Plus improves on the original Kayfun Lite. Here are a list of changes:
The new two piece 510 connection pin is completely adjustable and removable for more flexibility. Center screw now adjustable
The fill port screw has an O-ring on it to protect leakage.
Bottom air flow control under the base for more control.
Brushed surface is difficult to get scratched or damaged. It just looks better
High quality stainless steel clone of the popular Kayfun Lite / Russian 91%. Made by Tobeco. Compares favorably to the EHPro & HCigar made clone. See customer reviews below.
This advanced rebuildable atomizer allows for multiple setups including either silica wicks or cotton wicks. Very reliable and amazing flavor. This has fast become many vapers go-to setup. With an approx. liquid capacity of 4mL, this tank can last you all day. This version improves on the performance of the original Kayfun Lite by adding a Kayfun 3.1 style airflow adjustment screw. Features stainless steel construction, removable drip tip, and standard 510 threading. Feels and vapes the same as the real Kayfun Lite.
NOTE: While this tank is compatible with 510 drip tips, we’ve found that many are a tight fit. Some fit, some don’t. There is no guarantee your favorite drip tip will fit We suggest the use of a microcoil with cotton wick. We’ve found this gives the best flavor and hassle free setup. When installing the clear middle tank section, don’t forget to transfer the o-rings from the steel middle section. Make sure you wash all parts thoroughly before use. There may be remnants of machine oils or metal shavings from manufacturing.
510 Kayfun Lite Style Drip Tip
Clear Plastic Middle Tank Section
Steel Middle Tank Section
Micro Screwdriver/Allen Key
2 Pre-made Silica Wicks & Coils.
THE DEAL: USE CODE kyjosh TO GET $5 off the Onyx Black Kayfun Lite Plus Rebuildable Atomizer
Replacement Parts and Accessories for V3tronix Flip
The adjustable contact – 2 pieces – is recommended for folks building at .2 ohm or less.
The Deal: After you have receive the new 2 piece contact, return the old 3 piece contact for a full refund for “Authentic” V3tronix Flip Owners!!
It’s going to take a couple of days to really get them reviewed and understood so for now just sit back and vape until everyone has time to break down all these regulations and make sure they haven’t missed anything that might be hidden.
Direct Link to Regulations: https://s3.amazonaws.com/public-inspection.federalregister.gov/2014-09491.pdf
Everyone thought that the Flips engraving couldn’t get any deeper, well the folks at V3tronix has proved us all wrong! Check out this beautiful Mod, that’s a special project for clothing designer Max Fechner, Owner of KYMERAH. http://www.kymerah.com
OK, NOW START DROOLING YOUR FLIP LOVERS!!
SOLD BY SMARTVAPES
Kanger Protank Clearomizer replacement single coils
These Coils will fit
Kanger Protank 2
Kanger Protank Mini 2
anyvape Davide Mini
box of 5 replacement coils we use genuine Kanger Coils for these
Comes in resistances of 1.5, 1.8, 2.2, & 2.5 ohms
THE DEAL: SMART VAPES HAVE THESE ALREADY MARKED DOWN TO $3.99 FOR A 5PACK
WOW!! I THOUGHT THE MNKE 26650 WAS A KICKIN BATTERY BUT NOW WE HAVE THE EFEST 60AMP TO BOOST OUR VAPING EXPERIENCE TO A ALL NEW LEVEL! I’M EXCITED TO GET MY HANDS ON A FEW OF THESE!!!
Efest 26650 3000mAh 60 Amp Battery is now available! It has an extra capacity for longer battery life and a high Amp limit.
1x Efest 26650 3000mAh 60 Amp Battery
THE DEAL: USE CODE 10percentoff TO GET 10% OFF YOUR ORDER
The Black Stingray Mod Clone is a quality clone of the original Stingray mod (JD Tech). The same outstanding quality but a much more attractive price tag!
When it comes to performance and functionality, the Stingray Clone Mod doesn’t fall short. It is a fully-mechanical 22mm device with 3 separate battery tube sections allowing the use of 18350, 18490, or 18650 sized batteries.
The Stingray Clone Mod can be used in 18350 and 18500 mode with a Kick module. It is also one of the smallest mechanical mods when used in 18350 mode, measuring in at under 6cm from switch to top cap. Top this off with a fully adjustable bottom switch and you have a winner!
Stingray Clone Mod SPECS:
- 1 lock motion bottom switch
- 18350, 18500, 18650 extension tubes with seamless threads
- Silver Plated Copper Contacts
- Floating Positive Pin
- Adjustable bottom switch and firing pins
- Super smooth and fine threads (0.5mm)
- Low Voltage Loss
WOW, this is a killer deal for the full size Smoktech ZMAX that uses 18650 batteries.
Variable Voltage: 3-6v
Variable Wattage: 3-15w
Short Circuit Protection
Reverse Battery Protection
Low Voltage Warning
Output voltage/wattage display
Compatible with battery: 18650
DIRECT LINK: http://www.usavapingsupplies.com/Smoktech-Zmax
The Efest IMR 18650 2500mah 35amp Flat Top High-Amp batteries are the newest most powerful battery Efest has made to date! These 35amp high drain batteries are a Sub-Ohm’ers paradise and sure to please the most advanced vape hobbyist out there.Size: 18.2mm Diameter 65.11mm Length
Model: Efest 18650 P35A
Type: Li-Mn (High Drain)
Rated Capacity: 2500mAh
Nominal Voltage: 3.7V
Peak Voltage: 4.2V
Cut-off Voltage: 2.5V
Chemistry: Lithium manganese Dioxide (Li-Mn02)
Style: Flat Top
Rated Capacity: 2500mAh
Maximum Continuous Discharging Current: 35 A. Maximum Charge Voltage: 4.2±0.05 V
This is one of the best looking DNA30 mods out there and most sought after mod clones right now! This great vendor isn’t saying it’s even close to a well known company so I agree’d to post it because he is showing respect to the original company by not playing off their name.
Cloupor’s Black DNA30 Mod clone Pre-Order
Incorporating the new state of the art DNA 30D into a stylish box mod.
- Full sized Aluminum body
- Custom milled display screen with a flush fit to the outside of the box
- Fits 18650 batteries (not included)
- Flush 510 connector
- Flush dome style Fire Button
- 7 - 30 watts
- 4 - 8.3 volts
- 0.4 - 3.0Ω Atomizer Resistance
- On-board USB charging @500mA
- LED shows Red while charging and Green when fully charged
- Micro USB wall charger & USB dust cover included
DNA30 Specs: Minimum Typical Max
Output Power 7 Watts 30 Watts
Output Voltage 4 Volts 8.3 Volts
Output Current 10 Amps
Atomizer Resistance 3 Ohms 1.5 Ohms 3.3 Ohms
Input Voltage 3.2 Volts 3.7 Volts 4.3 Volts
Input Current 1.5 Amps 6.0 Amps 7 Amps
Color options: Black,Blue,Green,Red,Orange, silver
EVER SINCE I STARTED VAPING ON A KAYFUN, I’VE WANTED TO GET A KAYFUN MINI FOR MY BAGUA 14500 AND TO USE ON MY EGO STYLE TWISTS. FINALLY SOMEONE WILL HAVE A CLONE IN THE USA AND AT A PRICE EVERYONE CAN AFFORD!!!
- Airflow control and airhole on side
- Clear window option
- Universal drip tip connection
- Full clear tank
This weeks deal!
GRAPE! 16% off when added to the cart!
One Bottle of our Grape E-Juice
Grape is a sweet smooth grape flavor. More of a candy or juice flavor!
Also, PRICE DROP on 120ml bottles of the Alchemist Blends! $65
Grape Vape: http://www.juicewytch.com/product-p/j2013gr.htm
The KK Vapetek atomizer coil jig is a handy little pocket device that makes wrapping coils simple and consistent every time.
Simply remove one of the wrapping posts from the internal compartment, insert it into the top hole and tighten the set screw. Wrap one end of your coil wire around the lower set screw and tighten it. Then simply begin wrapping your coil around the wrapping post until it has as many wraps as you require. When you’re done, snip the ends and remove it from the wrapping post. You can also remove the wrapping post with the coil still on it and use it as a stabilization tool to attach it to your rebuildable atomizer.
The three included wrapping posts are: 1/16″, 3/32″, and 1/8″ in size. The set screw hole will accept up to 9/64″ if you want to make your own larger rods.
The device also doubles as an atomizer stand since it has a 510 threaded hole in the center.
Do not torch your coils while they are still attached to the jig body. The set screws are nylon and will melt. Also do not over tighten the set screws or you may strip them.
Direct Link: http://pyramidvapors.com/product/atomizer-coil-jig/
Every Monday at 8pm Est on Vaping with Kentucky Josh & Medic Zach – http://Vapers.tv/VapersNation
Please like out FB page!! https://www.facebook.com/vapingwithkentucyjoshmediczach
We are always looking for great sponsors, if you are a USA vendor and interested please feel free to contact me!
Lots of Giveaways:
88eVape – Nemesis Copper Mod clone
TJ’s Paracord Designs Black 18650 Tube mod holder
101 Vape – Innokin VV/VW V3
AKA Vapers -Innokin EP Starter Kit
Vapin Bagz Mod Holder/Holster
Bluegrass Vaporz 30ml bottle
6 30ml bottles of Strix Elixirs
Juice Wytch 10ml Bottle of Signature or Private Stock
2 $10 Gift Codes and a 30ml from VapeinParadise.net
Pitbull Vape Juice (3 30ml bottles of Blue Nose Twist)
Hoosier Vapes (2 30mls)
Jeff’s Juice 2 – 5ml bottles to one winner
$10 Code Hat Trick Vapor
Puff-U 2-30ml bottles
Vape in Paradise 30ml bottle
Pitbull Vape Juice 30ml bottle of Blue Nose
Bluegrass Vaporz 30ml bottle
Strix Elixirs 1 30ml bottles
Baker White 30ml bottle of juice
Mt. Washington Mod Shop – Cup-holder style mod holder
You never know who may pop into chat with other giveaways, our show is always open to other vendors and for vendors to post their latest deals, items, and info in chat!
Vaping with Kentucky on Youtube: http://www.youtube.com/user/fields5302
I don’t know about you but I hate trying to read the little #’s on the ego/evod twists, you need really good eye sight or a magnifying glass but not any more!!
*NOW IN STOCK!
The Kanger IPOW is a variable voltage eGo style battery that features a built-in LCD screen and bottom voltage control dial.
The IPOW has a built-in Smart Buck-Boost converter and a modified circuit which enables adjustment of the output voltage.
Adjusting the voltage output will allow you to customize your desired throat hit vapor / flavor production and throat hit.
Quickly change from 3.0V up to 5.0V in 0.1V increments by simply spinning the voltage control dial located on the bottom of the battery.
The backlit LCD screen will display your battery’s current voltage setting as well as a battery level indicator so you never have to guess when to recharge.
The IPOW also has a 5-Click On/Off function which can help prevent unwanted or unintentional use by simply pressing the Manual Button 5-times in a row to turn the battery “On” or “Off”.
These batteries are 510 | eGo threaded and are compatible with a wide variety of 510 and 510/eGo Threaded Atomizers, Cartomizers and Clearomizers.
- Capacity: 650mAh
- Colors Available: Black | Stainless Steel | Blue | Red | Purple | Pink | Green
- LCD Screen: Backlit display voltage & battery life indicator
- Size: Length __ Inches | Diameter __ Inches
- Style: Fish-Eye Plastic Manual Button
- Thread: 510 | eGo
- Voltage: 3.0V – 5.0V (variable voltage in .1V increments)
The Deal: During April use Coupon Code: V2NH45 to get 10% off your order, making it only $22.49
Socal Tortuga, the host that everyone has come to love is having a great Easter Sunday Sale on his entire Juice Line!!
All my juices are custom made by hand in the USA
I believe in quality over quantity
Only the best goes into each and every bottle
Freshness is key
Each bottle is made to order and shipped within days of being mixed
THE DEAL: Use code EGGHUNT for 15% your entire juice order until Sunday Midnight PST
DIRECT LINK: http://www.socaltortuga.com/
**EXCLUSIVE HARD ROCK VAPOR CODE for VAPING DEALS & DISCOUNTS!**
This is the FIRST batch of the newly updated Seven22 mods that will hit the USA vendors, so if you want one you better buy this quickly before they sell out!
SEVEN-22 MOD – 24 HOURS SALE – $109.99, that $10 off the sale price
The Seven22 is one of the hottest selling 26650 mods on the market right now with its ability to hit 22watts and sub-ohms! The manufacturer found that at 22 watts and .5ohms the spring under the pin would overheat and could shut the whole unit down, so they re-worked it and replaced the spring with a screw ..
GREEN LEAF SEVEN -22 MOD
One of the most highly regarded and sought after 26650 mods in the vaping industry! *** The manufacturer has found a defect and is changing the spring under the pin to a screw … ours will be the first with the new configuration! *** These mods are new and our order is being completed to ship to us on 4-18-14.. We will ship out on a first come first serve basis as soon as they arrive!
Output power: 7~22watt. (SX220 chip built-in)
Output voltage: 4~8.5volt.
Input voltage: 3.2~4.2volt.
Top grade Stainless Steel material.
24k gold-plated spring.
510&eGO thread, floating atomizer positive contact pin
The Deal: For the next 24 hours use code HARDROCK722 to get $10 off the already low sale price of $119.99 making it $109.99
DIRECT LINK: http://www.hardrockvapor.com/seven-22-mod-1/
WOW.. Get some of this juice at these prices while you can!! I’ve tried their juices and I must say, they are yummy! The Twinkelicious and the Tester 77 are hard to pass up, the flavors are unique and will make you want more!
The Deal: Easter Sale use the code ” easter ” for 40% off Juice
Direct Link: www.Vapeinparadise.net
Modular Design with Three Brass Tubes: 18350 Body, 18490/18500 Extension, 18650 Extension
Top Cap: Stainless/Brass with Vent Slots
Floating Top Pin: Allows to Enable Flush-Mounting Atomizers
Battery Contacts: Silver-Plated Brass for High Conductivity and Corrosion Resistance
Bottom Cap : Stainless/Brass with Vents
Switch: Short-Throw, Magnetic Return. Locking Ring to Prevent Misfires
Laser-Etched Stingray Design and Serial Number on Body Tube
Laser-Etched Gear Design on Bottom Face of Switch
Matching Drip Tip with Laser-Etched Design
Packaging: Plastic Bag, Bubble Wrap, White Cardboard Shipping Box
I love my Tobeco Hammer Mod, in 18350 mod its hard to beat! I use mine daily.
Brand New Hammer Mod with Extra Tubes – By TOBECO – fits 18350,18650 or with or without kick.
Mirror finish Stainless Steel Body + Brass inner tube.
Actual Item as shown in picture.
This Product works with 510 Threads Atomizers Only.
1:1 Replication of original
Laser engraving logo on body
White plastic insulator
Top spring-loaded firing switch
Serial number laser engraved
Reverse threaded locking ring
Bottom 6 vent holes
Recessed Floating 510 connection
Houses a single 18350 battery, or a single 18650 battery with extra tube. Extra tube for kick also included.
1* Hammer mod
1* Extension tube for 18650 battery
1* Extension tube for kick
Direct Link: http://www.akavapers.com/Tobeco-Hammer-Mod.html
I CHECKED THIS DEAL OUT, MAGNETO’S FOR $30, KRACKEN FOR $16.46, PATRIOT CLONE FOR $8.44 AND MANY MORE DEALS!!!
Its Good Friday and Timeless is offering a two day Sale! From now till Saturday grab your favorite Vape Gear and save 25% off, store wide. Use code bunnyhop out check out to recieve your savings. Good for online only!
www.timelessvapor.com Happy Holidays to Everyone