The iTaste MVP 2.0 is a 510/Ego threaded device with a built-in 2600mAh battery. This box mod is loaded with features such as VV, VW, passthrough function, LCD screen, ohm meter and can even be used as an on-the-go charger for your portable devices.

Dimensions: 4.21″L x 1.61″W x 0.86″D
Charge Time: 5-6 hours


Variable Voltage: Voltage can be adjusted from 3.3 ~ 5.0 in 0.1 volt increments
Variable Wattage: Wattage can be adjusted from 6.0 ~ 11.0 in 0.5 watt increments
Ohms Meter: Reads the resistance of your atomizer
Puff Counter: Number of puffs taken since last time the battery was turned off.
Protections: Short Circuit/Atomizer Protection, Over-Discharge Protection
Battery Level Indicator
Large battery capacity: Built-in 2600mAh polymer Li-Ion rechargeable battery
High compatibility 510 connector: Threads fit 510 atomizers and many Ego Clearomizers, iClear10,iClear16 ,iClear30 etc
ON/OFF battery switch
10 seconds cutoff
Pass through Functionality: Can be used while the battery is being charged
Memory: Remembers last set voltage or wattage when the battery is turned off and then back on
Built-in 3 digit display: Digital display shows Ohms meter, Voltage /Wattage setting, Puff count
Portable power source: USB output port can be used to charge portable Mp3 players and cell phones

Direct Link:
puffu mvp deal

It’s Puff-U

The iTaste MVP 2.0 is a 510/Ego threaded device with a built-in 2600mAh battery. This box mod is loaded with features such as VV, VW, passthrough function, LCD screen, ohm meter and can even be used as an on-the-go charger for your portable devices.

Dimensions: 4.21″L x 1.61″W x 0.86″D
Charge Time: 5-6 hours


Variable Voltage: Voltage can be adjusted from 3.3 ~ 5.0 in 0.1 volt increments
Variable Wattage: Wattage can be adjusted from 6.0 ~ 11.0 in 0.5 watt increments
Ohms Meter: Reads the resistance of your atomizer
Puff Counter: Number of puffs taken since last time the battery was turned off.
Protections: Short Circuit/Atomizer Protection, Over-Discharge Protection
Battery Level Indicator
Large battery capacity: Built-in 2600mAh polymer Li-Ion rechargeable battery
High compatibility 510 connector: Threads fit 510 atomizers and many Ego Clearomizers, iClear10,iClear16 ,iClear30 etc
ON/OFF battery switch
10 seconds cutoff
Pass through Functionality: Can be used while the battery is being charged
Memory: Remembers last set voltage or wattage when the battery is turned off and then back on
Built-in 3 digit display: Digital display shows Ohms meter, Voltage /Wattage setting, Puff count
Portable power source: USB output port can be used to charge portable Mp3 players and cell phones

Direct Link:

puff-u mvp

The ATOMIC has finally been cloned. This is one of the most sought after and rare atomizers around. The quality of this clone is amazing. Made by Ehpro which is the best clone maker in the game.

ATOMIC atomizer clone. This atomizer/RDA is great for dual coil builds with 3 posts.



Piece Construction using Food Grade 304 Stainless Steel
Brand new air intake technology, air inlet is in the middle of the atomizer tube
510 connection, 510 thread, compatible with 510 drip tip.
Super easy to re-change wick and wire yourself.
Tripole with Phillips Head Screws
Abiltity to build single and dual + coil builds
Resistance can be customized as your demand.
Selective Airflow via an Outer Sleeve for single or dual airholes
Selective Airhole sizes include 1.5mm, 2mm, 3mm for single or dual airholes

Expected release date is 26th Mar 2014


Direct Link:


Sold by White Stag Vapor

White Stag Vapor has all 3 mods  but some of them will be limited stock, I’ve not seen these in stock any where else so these won’t last for long!!

Ehpro Gunmetal Origin Clone Mod



1. Newest designed 100% Mechanical mod

2. 510/eGo thread, compatible with all 510/eGo atomizers/claromizers

3. Compatible with battery styles of 18350, 18500, 18650

4. Power Strong, individualization design, fully mechanical switch

5. Shiny durable high grade metal material, elegant appearance.

6. No Wire Solder, no welding, Mechanical switch button, easy to press and lock

This mod features a special gunmetal plating.


HCigar Gunmetal Nemesis Clone Mod & 

HCigar Gunmetal Brass Two Toned Nemesis Clone Mod

Gunmetal plated tubes, Brass top cap and bottom button.


The Nemesis Clone also features an adjustable 510 center pin,

Airflow control system,

Locking bottom firing button,

Silver plated contacts,

A recessed 510 connector.

The outer diameter is 22mm and the length will depend on your battery setup.

This mod features a special gunmetal plating.


**These will ship to me by Tuesday, March 4th, 2014, and I to you immediately.

The stock number shown is representative of actual numbers I am receiving next week.

Due to the nature of this new gunmetal plating, we cannot guarantee the quality. There may be variations in color (darker spots).


Gunmetal Origin:

Gunmetal Nemesis:

2 tone Gunmetal Nemesis:

Gunmetal mods

I was looking through Facebook the other night and found this site like I do many sites but I started going through their devices and couldn’t believe how impressed I was with so many items from one vendor, this has only happened a few times. As I looked at each item I found a few that caught my eye and I wanted to share them with everyone, so here they are starting with the AR Mechanical Mod.

AR Mod

$179.95 and up

AR Mod – USA Made Mechanical Mod

The AR Mod is the newest, most innovative mod by Tac Mods USA. The AR Mod is a patent pending design with an octagonal shaped button so you never have to worry about losing your bottom button. The AR Mod is a unique design to replicate a traditional AR-15 assault riffle barrel. This design is not only great ascetically, but it also has functionality. The air holes in the 18650 body allows heat to escape so your AR Mod does not get hot.


They also have some other mods, customized atomizers and drip tips I really loved.

Sold By Bluegrass Vaporz


  1. Zinc alloy and silicone , the first one introduced that uses these materials in electronic cigarette industry;
  2. Dust-proof and primary water-resistant.
  3. Rechargeable and and use as a power source.
  4. Use  as mobile power ,charging for digital products;
  5. Setting up flashlight, temporary emergency lighting;
  6. Internal with 18650 battery, it can be changed with new 18650battery or it can be charged from the case.
  7. It shows battery’s power, show battery outputting voltage and power.


  1. Voltage and Wattage variable APV.
  2. 510thread ,connector and atomizer is convenient to be dismantled;
  3. Setting Power Switch of Static state ,keeping power without loss;
  4. Locking feature so you wont accidentally change your settings.
  5. Long time to use e-cigarette alarms;
  6. Shortcut protection;
  7. Protection against reversebattery;
  8. The color of led light distinguish to power showing ;
  9. Thru-elastic contact to ensure a good connection of various atomizers;
  10. Overcharge protection/over-discharge;
  11. Hidden discouraged hole, ensuring that the product safety and the battery under special circumstances;
  12. Exquisite shape,good quality;
  13. Matching professional wrench for users for replacing the batter.
  14. What you get is the Mod,allen wrench(for the batt),and the box it comes in……It uses 1- 18650 batt(not included)
  15.  VV 3.0v-6.0v, VW 3w-15w

This is a Pre-order for 25 (or more if demand goes that high)only,When 25 (or more are ordered) i will place the order. this is on a time sensitive scale,im running it for 1 week….lets see what happens……..Vape on!!!!

The Deal: This is a pre-order but they are wanting to get this taken care of ASAP and into your hands fast, so fill this 25 within a week and get these 1st set ordered. Its the cheapest Price I could find online in the USA

Direct Link: Bluegrass Vaporz E-Lvt



In this review I had the pleasure of being able to get my hands on a Flip from V3tronix and what a mod it is!! I’ve never had a mod in my hands that is built so well out of solid Stainless Steel that I felt secure in using it for anything I wanted to use it for.

V3tronix site:
V3 Flip:…

In the video I used 3 different atomizers:
The custom cap & tip from Anodizers Are-I

The Cartomizer Tank from Trinity Tanks

The Vortex by Progen from Vaper Venue

The juices were from Juice Wytch and Socal Tortuga



Kentucky Josh on V3tronix Website

v3 flip review



One of the most popular atomizers on the market today. Plus we will include three coils in this kit! This STEAM Protank will produce huge vapor and bring out the great flavour of your eLiquid! Uses standard Protank colis!




Sold by

Product Description


The Hcigar Steam Turbine (Clone) is a high quality genesis-style Rebuildable Atomizer that can built with stainless steel mesh or silica wick.

Rebuildable Atomizers are for the vaping enthusiast and will allow you to build your own coil and wicking system.

The Steam Turbine features two (2) holes that will allow you to build single or dual coils, a 3mL glass tank, stainless steel see-through sleeve and it comes with a matching 510 drip tip.

For best results, we recommend to wash the entire Atomizer (including the glass tank) before use.


HCigar Steam Turbine (Clone) RBA Features

  • Stainless Steel Finish
  • Genesis-Style Rebuildable Atomizer
  • 3mL Glass Tank
  • Can be built with Single or Dual Coils
  • Can be built with Silica, Ekowool & Stainless Steel Mesh
  • Two holes for optional U-Wick configuration
  • Stainless Steel Sleeve (Glass) Cover with cut-out windows
  • Matching Stainless Steel Drip Tip included and can also be used with most ’510′ Drip Tips
  • Two (2) airholes in Top Cap
  • Phillips head screws
  • 510 threaded to allow use on most APVs / MODs, 510, and eGo threaded devices


IMPORTANT NOTE: The Steam Turbine Rebuildable Dripping Atomizers ( RDAs or RBAs ) are for EXPERTS and ARE NOT recommended for average users or beginners.  The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks.  WE DO NOT OFFER ANY WARRANY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.



  1. Wicks / Coils must be tested carefully with a multimeter before use.
  2. If Wick / Coil is not properly tested it will be a risk to the user to do so.
  3. Faulty Wicks / Coils WILL kill electronic devices.
  4. New Wick / Coil units must be tested and then used on a strong basic electrical APV / MOD that has short protection.
  5. No new Wick / Coil assembly should be used on an electronic device until it is known to be safe.
  6. These items destroy electronic devices if not properly built.  This is a known issue.


The Steam Turbine comes with

  • 1x HCigar Steam Turbine (Clone) Rebuilable Atomizer
  • 1x Matching 510 Stainless Stel Drip Tip
  • 1x Kanthal Wire
  • 2x Stainless Steel Mesh 400

The Deal: 10% off ‘most’ products with *Coupon Code “MD823J”

Direct link:


hcigar steam turbine



Clear cap and drip tip for the IGO W family of dripping atomizers. Dual air holes for maximum air flow.



DIRECT LINK:!product/prd13/1644081395/igo-w-clear-cap-w-drip-tip

Don’t forget to check out their kickin Vape Bagz while you are there!!

clear igo w cap


Key Features

Compatible with: Helios, IGO W, and Nimbus Dripping Atomizers
BIG Barrel Bore – Direct Drip Through The Tip!
Adjustable Airflow Control
2 x 1.8mm & 4 x 1.25mm Air Holes
22mm wide
Optional IGO-W Base With Purchase


$25 – Cap Only | $35 Cap + IGO-W Base

(Igo-w base: available from the pull down menu located above the add to cart button)

The Keg Cap, is the next big thing in dripping!  By big we mean wide, and by wide we mean the biggest barrel of a bore on the market.   Compatible with three of the most popular dripping atomizers in vaping, this versatile new cap will never tap out.

Be king of the clouds with this brand new, must have accessory!

No Dripping Atty? No Problem!

Just select the option for Keg Cap + IGO-W and we will include an IGO-W dripping atomizer base with your purchase for only $10.00 more!!!

FREE e-Liquid with every purchase!

Simply choose your preferred nic strength on checkout and we will add some juice to your order!


keg cap

Sold By

One of the biggest sought after RBA’s right now is the Kayfun’s and after getting one myself I can see why! They are one of the easiest RBA’s to build and work on, plus they vape Great!.

I have the Tobeco version of the Kayfun lite and its nothing compared to the Hcigar Kayfun 3.1 from what everyone has told me so I will be grabbing one of these for my self! This Kit has everything you need to work on the atty plus store it when you aren’t using it, which probably will end up being a junk holder because you will always be using the Kayfun, if you are like everyone that has a Kayfun.


1 x Kayfun 3.1 clone w/ adjustable airflow

1 x clear tube

1 x Atomizer tool

1 x zipper pouch

1 x threaded drip tip

1 x drip tip adapter

1 x pre coiled wick

The Deal: always has great low prices and this is another great deal for this Kit at only $44.99

Direct Link:

hcigar kayfun kit

Sold by VapeBand, Powered by Pananal

Info from VapeBand:

A VapeBand (a PANANAL INC. product) is a high quality silicone band that is custom made from a mold with debossed text. The process of creating a mold and debossing allows VapeBand to create custom bands with text that can go fully round the outer band and allow us to have a front and back with different text or logos.

All our bands are debossed with words recessed into the silicone via an imprint mold and text colored recessions, making the lettering more visible.

All of our bands are embossed with “” on the inner ring which protrudes about 2 millimeters from the band’s surface. This identifies that they are Genuine/Official VapeBand products.

Our silicone bands display high levels of elasticity, allowing them to stretch over most mods fitting 22mm + surfaces up to rougly a 26650 battery sized mods [over stretching our bands will void any warranty]. Our bands grip easily to metal and glossy surfaces such as stainless steel, brass, copper, titanium, anodized aluminum, polycarbonate, pyrex glass and stickers.

All of our bands are custom made and come in a variety of sayings, colors and text styles.

Using a VapeBand
VapeBands can be used to give your mod a voice, what we call “Mod Speak”, or to give your device a new look, cover blemishes etc., but these high quality silicone bands perform a variety of functions for the vape enthusiast, using them on but not limited to:

  • tanks, genesis atomizers, rebuild-able drippers, creating a bumper for your devices & components
  • devices that require adjustable airflow where the function is not supported by the native device, or for those over bored out (drilled) holes where what normally would be the time to retire the devise, now some might be re-usable and take on a new look along with being functional again
  • telescopic mods and the gaps when using different battery sizes
  • bottles where they create a grippe surface that can assist in opening
  • other surfaces where gripping in required to un-thread one component from another, allowing for effortless removal

The functions above are some of the ones we have found VapeBands to perform and perform well, but these are just a few of the main uses and certainly not limited to these in any way. The Team at VapeBand looks forward to hearing how the vaping world receives our product, finding new ways to make use of this low cost high quality product.

The Deal: This can pretty much be used for many different things and at this price, why not have one!! Now if there was a Vaping Deals N Discounts, Vapeband!!

Direct Link:



Sold by AKA Vapers


KSD E-Huge Complete Kit Stainless Steel:

1x E-Huge Body

1x Extra Tube

2x KSD INR 26650 4800 mAh Battery (fits flush when stacked)

1x USB Device Charger

1x Manual


KSD E-huge Specification:

The new E-huge variable voltage / watt mod is made of stainless steel.

E-huge Mod is a 134 style Vamo VV MOD

1.Working voltage from 3.0V to 6.0V

2.Can test Atomizer’s resistance, and Display voltage, power

3.Fit atomizers with resistance 1.5~5.0ohm

4.Protected function

5.Output power 3W—15W

6.Variable voltage , 510 connector

7.APV or RMS mod

8. when the e-huge is short circuit, it will show “short”

The Deal: Get the kit for $107.98 using “bagit90210″ 10% off coupon code.

Direct Link:


KSD E-Huge Complete Kit

Sold By Vices Electronic Cigarettes


The X1 is the RDA from Kamry Technology. Featuring an airflow channel underneath the coil!

Unlike the Octopus RDA the X1 uses threads to screw down the top cap rather than using o-rings, this means the top cap will not easily slip off when removing the drip tip or handling the unit. The X1 has an improved air flow design, with the air hole sitting directly below the coil for maximum exposure to the coil, unlike the Smoktech Octopus you do not need to align two air holes against each other to enable it to work, the X1 has air holes on its 510 connection like conventional atomizers, with hole sitting directly below the coil for maximum exposure!

If you’re a modder, the X1 cap uses a soft metal so you can easily drill a hole in to the side for more airflow if you require!


  • Diameter: 18mm
  • Length: 27mm


  • Rebuildable Atomizer
  • Easy change heating coils
  • 510 thread






Sold by The House of Vapor

High quality wire, perfect wire for rebuilding atomizers!

Wire Specs:

  • 28 AWG- 0.439 Ohms/in, 0.0508 Diameter (in.)
  • 30 AWG- 0.696 Ohms/in, 0.0100 Diameter (in.)
  • 32 AWG- 1.091 Ohms/in, 0.0080 Diameter (in.)
  • 33 AWG- 1.383 Ohms/in, 0.0071 Diameter (in.)
  • 34 AWG- 1.758 Ohms/in, 0.0063 Diameter (in.)

Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance.

The Deal: This is the price on their site so I took a snap shot to show ya. Thats just flat out dirt cheap!

Kanthal for 15 cents and underkanthal

Hard Copy:


Betamorph E-Cigs was broken into last night as you can see by the posted picture. We have the guy on camera. He’s about 6’1″ and about 250lbs. He stole pretty much our entire stock. He also stole my laptop. My laptop is a Fujitsu LifeBook with a 19″ screen. I have the serial number and it has been reported to the police. The police have already been here to do a complete investigation.

Products that were stolen (This is not a complete list): 2 VTR’s, an iTaste134, about 30 Vamo’s (V2 V3 V5), 10 or so Nemesis Clones and the same for Chiyou Clones, about 50 random atomizers (IClear30s, IClear30, Iclear 16′s, MT3′s, Vapeonly mini’s and more), all of our Ego Twists and the rest were taken as well. The Ego Twists all have the Betamorph E-Cigs logo on them. About 200 or so bottles of E-Liquid with our logo on them were taken. He also took our entire flavor sample shelf. So, if you happen to run across some sort of strange scenario where you see a guy/group/swapmeet/craigslist ad selling some of our products than you’ll know what happened.

We would really appreciate it if you would help us spread the word about what has just happened. We have already contacted roughly five or so local E-Cig shops and we’re hoping that more people will share this message on their Facebook feeds. We’re feeling confident that this story will end well. Thank you in advance for any and all of your help.

DeeJ/The Nicologist

Betamorph E-Cigs
2000 Carlisle Blvd NE Suite B Albuquerque, NM 87110

Check out what UD has came out with!! Having something to rebuild your atomizers on will make your life much easier.

Are you tired of trying to balance your atomizers while doing tricky rebuilds? Struggle no longer with this solid, heavy 510 connector base. With this base you can simply screw in your RBA/RDA and build away!

This rounded, stainless steel base even makes a nice piece to add to the collection just to keep your atomizers on when not in use!

UD AGH Rebuilding Base

Aspire BDC Glassomizers 

The Aspire Bottom Dual Coil Glassomizers are some of the most advanced atomizers on the market. The Glassomizer versions come in the most common form factors Vivi Nova, Mini Vivi Nova and ET (Protank) models. These models have a glass tank protected by a metal sheath with viewing window. They are easily filled from the bottom and the atomizer head is easily replaced. I have them available in Black & Stainless Steel.
Use Code “aspire” for an additional 20% off valid till 1-12-14

*Code does not apply to the Aspire Nautilus

aspire sale

Pre-Order for EHPro Copper Caravela Clone 18650 mod.

ROUND 2 Pre-Buy


  • polished Copper 18650 tube (comes with the mod) with gold plated brass end cap and bottom button (some pictures may reflect differently)
  • complete mechanical switch
  • Silver plated copper adjustable center pin
  • fits 18650 batteries, and can accomodate 18350 and 18500 with extra tubes (optional)
  • easy to press switch with updated spring (stiffer than original)
  • 510 connection for standard atomizers
  • Options include a possible second 18650 tube.  You do not need to include that option unless you wish to have an additional one.

Please note, this mod comes with 18650 tube standard, ship logo and serial number.  It will not have Ehpro’s name or “DHX016″ branded on it.

This product does NOT come with atomizer or drip tip.  Photo is just an example, and not the final product.

This is a Pre-Order.  We do our best to accomodate all the orders, but we cannot be responsible for delays from the manufacturer or shipping services/customs.  Once MOQ of 50 is reached the order will be ready for placing with EHPro.  We may hold on a few days after to try and reach 50 units.  This pre-buy may last into January 2014 before we reach MOQ and order from the manufacturer.  Please be patient.

Expected release date is 10th Feb 2014



Lately I’ve seen so many of the same atomizers and mods going around, I want to find some of the lesser known items. I’m wanting to kick start my reviews this year with some of the most odd, unusual, and weird items! The less known the item is the better it will be too! I’m trying to find a couple atomizers to purchase, mainly rba’s and drippers that I can use in a high end mod review I have coming up and of course the atty I use in the review will be advertized in the review with the shops name and link. Do you have anything you would suggest?

Video Reviews do help!! Not only do vapers see the review but companies do to. Its a way for a company to get their product name and how a item operates out to thousands of people. I post my reviews on my site, I also show all the items during my online shows, and I also of course share my reviews with you to use.

I do more than just run Vaping Deals n Discounts, I’m a show host, manage Vapers Nation, a aspiring reviewer, and help  out in the vaping community in any way I can.  Since I started doing reviews I’ve been mainly doing juice reviews and I love doing them, I will be doing more juice reviews soon also but I want to get into the equipment side of the reviews.

If you know anyone interested in having me do a review, you are a vendor, or you are a manufacturer please feel free to contact me below.

flame skull kentucky josh wallpaper

Contact Form

[Form id="1"]

Here ya go folks, the Vamo V5 in the US for under $40

This spectacular mod gives you the best of all the generations of the Vamo. Enjoy the variable voltage and variable wattage that can be adjusted from 3.0V to 6.0V in .1 increments by using either the left or right button; or the wattage setting – starting at 3.W and increasing in .5 increments to 15W. Unlike the previous incarnations of this timeless mod you have not only the body style of the Vamo V2, but the OLED screen as found on the Vamo V3, and an upgraded chipset as well as a beauty ring that allows you to have a wider range of compatible atomizers (this mod is both eGo and 510 threaded). As would be expected, you can also check the ohms of your atomizer and the life left in your battery.

This leaves you with the ultimate mod for convenience and efficiency. This listing is for the Stainless Steel Vamo V5 Body only.

vices vamo v5 also Vices Vamo V5

Hard Copy:


Our Employee,Friend, and extended vape family member was in a tragic car accident on 12-12-2013 and has been fighting for his life ever since. We all came together and decided to make shirts to help the family out in a time of need. His favorite saying was Im not making clouds I’m changing the weather. As he love messing with rebuildable atomizers. All profits from this will be donated to the family. Please Specify what size you would like in the Comment section at checkout!

Sizes available are Small, Medium, Large, XL, 2XL $20

For more information about Dusten please click the link below:

Thank you Sarah for asking me to post and share this!

This illustrious Moon Mod has eGo and 510 threads – making it compatible with most atomizers on the market! This mod uses 18650 batteries. Vape with high quality stainless steel and brass with this gorgeous, heavy, unique piece. Mechanical mods have many benefits; if you’re looking for a highly reliable mod that can stand up to much abuse, this is the mod for you! If you’re looking to do sub-ohm vaping, this is the mod for you! If you want to have the most fashionable mod around, this is for you! If you want to stand out in a crowd, then, of course, this is the mod is for you!

Does not come with Royalty Series Clearomizer – Gold.

Subscribe to Reviews by KY Josh

Enter your email address to subscribe VDND and receive notifications of each new posts by email.

Join 77 other subscribers

Juices of the Month

All deals and discounts posted are those of the actual vendors listed. Vaping Deals n Discounts does not carry inventory, nor does it sell any actual product. Vaping Deals n Discounts is a free service, and its sole purpose is to locate and promote existing sales to pass on the savings to you, the vaping community. Prices listed by the individual vendor are accurate as of the time of the posting, but those prices are subject to change without notice, at the vendor’s discretion. Vaping Deals n Discounts makes every effort to post expiration dates on sales listed, but vendors are not responsible for matching the prices posted on this site, if the price has already changed as of the time of viewing. All Images used are found on open websites such as Google or by permission from the vendor being advertised and will not be held responsible for any vendor using trademarked or copyright material. This is not a site that sells any of the products listed.