Sold by 101Vape.com
Hades V2 Clone – PREORDER
This item is a preorder for The Hades 26650 mod CLONE. We are told by the manufacturer they are a 1:1 clone. They are expected to ship from the manufacturer in 2-3 weeks (March 24th-April 1st). Shipment time is only an estimate and delays may occur.
Free Sony US26650VT 26650 50amp battery included with every preorder! (US only) Free Sony battery valid for US residents only. The batteries are expected to be shipped out with the Hades clone. If for whatever reason the batteries are not in stock at the time of arrival of the mod the batteries will ship out at a later date.
and they offer the Hades V1 Clone – PREORDER
Want the original?
Hades V2 Mod by Footoon of UVO Systems- 2-tone Bushed
Hades V3 Mod by Footoon of UVO Systems- Polished Brass
Sold By 101Vape.com
The main 18350 tube of the HCigar Turtle Ship V2 clone features the signature UVO Korean laser etched engravings on both the front and back side. The HCigar Turtle Ship V2 is composed of 100% stainless steel and comes with a total of 3 battery tubes allowing you to easily change the length of your device and to accommodate an 18350, 18490 or 18650 batteries.
The HCigar Turtle Ship V2 clone mod has a brass atomizer contact pin and a brass bottom firing pin for ultimate conductivity. The white delrin ring on the Turtle Ship clone’s button allows you to adjust the delrin piece upwards/downwards to eliminate any unwanted battery rattle inside the mod.
The HCigar Turtle Ship V2 clone features a locking ring to allow the mod from any unwanted firing when placing it in your pocket or setting it down on a table. The HCigar Turtle Ship V2 clone has a 510 atomizer connection which will fit most atomizer and is 22mm in diameter.
The Deal: 101Vape.com has the mode already priced to sell at $39.99
Sold By 101vape.com
HADES MOD V2 BY FOOTOON UVO SYSTEMS | BRUSHED SS WITH BRASS ACCENTS
- 316 Stainless Steel
- 28.5mm (top cap)
- 26650 batteries only
- silver plated brass contacts
- comes with magnetic and spring switch
PRIORITY SHIPPING ONLY ON THIS ITEM
Direct Link: HADES MOD V2 BY FOOTOON at 101VAPE.COM
SOLD BY 101VAPE.COM
Extremely high quality original and unique multi-purpose design by the makers of the AGA-T Genesis, Youde Technology. It utilizes an extremely easy to implement ability to switch from Genesis mode (which uses mesh) to dripping mode (which would use silica or your preference for wick). It is manufactured with highly polished 304 Stainless Steel and its tank is actually a sturdy pyrex glass with medical grade silicon o-rings.
The UD AGI Transformer comes with a native 510 connection in both tank and dripper mode.
- Complete Tank as Pictured
- Polished 304 Stainless Steel body and caps
- 1.75mm thick (23mm high) Pyrex glass tank to be used only in tank mode.
- Hex key, mesh, silica wick, spare screws and headless screws, o-rings in included parts bag.
- Dimensions: Tank Mode – 48mm, 1.9 inches high, 22mm, .85 inches wide
- Dimensions: Dripper Mode – 25mm, .95 inches high, 22mm, .85 inches wide
- This DOES NOT come with a drip tip
Sold By 101Vape.com
One of the biggest sought after RBA’s right now is the Kayfun’s and after getting one myself I can see why! They are one of the easiest RBA’s to build and work on, plus they vape Great!.
I have the Tobeco version of the Kayfun lite and its nothing compared to the Hcigar Kayfun 3.1 from what everyone has told me so I will be grabbing one of these for my self! This Kit has everything you need to work on the atty plus store it when you aren’t using it, which probably will end up being a junk holder because you will always be using the Kayfun, if you are like everyone that has a Kayfun.
1 x Kayfun 3.1 clone w/ adjustable airflow
1 x clear tube
1 x Atomizer tool
1 x zipper pouch
1 x threaded drip tip
1 x drip tip adapter
1 x pre coiled wick
The Deal: 101Vape.com always has great low prices and this is another great deal for this Kit at only $44.99
SOLD BY 101VAPE.COM
If you’ve ever wondered what your mod is really putting out to your atomizer, this is the answer. You can put this between your atomizer and mod or any device to check the voltage output.
Screws onto your mod to test voltage. Huge LED display in red.
- Test your mechanical mod battery voltage,
- Attach your atomizer to see pass-through voltage,
- Test voltage drops,
- 510 threading
The Deal: These were just put into stock today and they sell fast so get one before they are gone!
The HCIGAR Sentinel M16 has silver-plated contacts. The logo and the serial number are laser-etched. This can be used with an 18650 battery with a kick. This is a telescopic mod, and a clone of the Grand Vapor edition Sentinel M16.
Included: 1x HCIGAR Sentinel M16
Fully mechanical Mod
Material: stainless steel
Output voltage: 3.7V to 4.2V
Battery Compatibility: 18350, 18500, and 18650 battery
Innokin VTR Variable Voltage/Wattage Mod
- Innokin VTR VV/VW mod
- 510/eGo extension tube
- carrying case
- iClear 30S
- Instruction Manual
- Solid steel construction
- Variable Voltage from 3.0 to 6.0 volts
- Variable Wattage from 3.0 to 15 watts
- RMS power
- Ohm detection
- rotating wheel to adjust power or voltage
- floating 510 connection
These are available for early purchase. 101Vape has already placed an order and these will be in stock soon. All items ordered with them will be shipped together upon arrival. Expected delivery is November.
This is The Kato Hammer Clone
1. 1:1 copy of original
2. 100% full stainless steel
3. engraved logo on side
4. lock protection system
5. brass connection for you
6. 18350/18490 battery
The last e-cig you will ever need to own….the K100 Mechanical Telescoping Mod Kit
No more worrying about batteries failing and leaving you stranded, no more worrying about dropping your e-cig and breaking it, no more worrying about constantly keeping a backup handy or carrying around extra devices. The K100 Mechanical Telescoping Mod addresses all of these issues and much more.
It features telescoping capabilities, which means you can use an 18650 or 18350 battery in the device It also functions via a mechanical operation rather than an electronic switch. What this means is that there are no electronics in the mod (other than the battery itself) that can fail and leave you with a non-working device. Therefore, as long as you can get your hands on 18650 and/or 18350 batteries (which are readily available even outside of the e-cig industry thanks to their use in high-end flashlights etc.) you will always have a working e-cig battery*.
- 1 x K100 Mechanical Telescoping Mod Device
- 1 x 18650 2000mah 3.7v Battery
- 1 x 18350 900mah 3.7v Battery
- 1 x Adjustable Battery Charger
- 2 x 510 Cartomizers (1 pre-installed)
- 1 x Color Matched Cartomizer cone
- 1 x Stainless Steel Calabash Drip Tip
- 1 x Blue zipper pouch
Includes a scratch off sticker to verify authenticity